Josh and his team at @autotech.alignment.inc always do fantastic work. What I like about Josh is he takes the time to listen to your goals and consults what will and will not work so you understand the limitations of the suspension and what is best for you and your vehicle.

The result is predictable and reliable solutions. If you ever need chassis work and getting things dialed in, this is the shop to go to.

I wanted more lift but trying to keep the factory geometry and not over extend or compress the shock due to the lift. The truck got @bilstein ride adjust set to the second lowest setting and @readylift upper control arms (to compensate for lifted geometry) and their 2.25" lift spacers. I dropped the front differential 1" to keep the CV axles from binding.

Because the Bilstein is on a lower setting, it has really good droop travel and we`renot preloading the spring much, and we put @energysuspension bump stop pads to prevent overextending on droop and @timbren_industries SES springs to help with weight of trailers but this also prevents compressing a lot. It`s a nice ride on the street, will deal with service roads easily and can handle weight of trailers in the front hitch.

#gofasthavefun #autotechalignment #GMC #Sierra #GMT900 4

Taking the families up with @jasonclark17171771 and @gabymoraz888 checking out Bridal HG/PG Upper Launch for the day.

@general_tire
@bilstein
@timbren_industries

Finished up the more braking and handling upgrades. Used @gmparts_acdelco severe duty rotors (higher carbon content), matched with @akebono_aftermarket performance pads. In the rear added @timbren_industries suspension enhancement springs to work in conjunction with @roadactivesuspension and finished it off with @bilstein 5160`s to control the rear axle and looks cool.

Half tons are sprung pretty light and with a 400 lbs canopy it eats into the payload capacity. I ordered the spacer kit so the Timbrens are engaged all the time. Slightly more bumpy on little things (needs to break in) but handles way better and soaks up larger imperfections really well like rail road crossings.

#gofasthavefun #GMT900 #Timbren #Bilstein #ACDelco

@versafel_systems was due for a brake service. We upgraded the fronts with @lordcoparts extreme duty rotors due to their higher carbon content and proven track record in emergency vehicles. We matched with severe duty pads from @raybestos_brakes severe duty pads. Grinded and cleaned all the mating surfaces, greased and back on the road.

#gofasthavefun #MercedesBenz #Sprinter #SevereDuty #Canada

Date night seeing Vancouver from a different perspective.

@gabymoraz888

Doing our first Father & Son "excursion" in the Sierra for the first time after some outfitting with some friends checking out Slotquet Hot Springs.

Wanted a setup that is versatile all round for quick deployment and pack up. Got to see what works, but need a lot more organization.

@napieroutdoors
@general_tire

#Adventure #Camping #sloquethotsprings

@versafel_systems wanted to redo the factory air deflectors on his Goldwing. He 3D printed new shapes to use as templates and provided layered carbon fiber. We fired up the @jessemtoolcompany router table and copied them over.

@mobilesolutionsfabrication
@12vtools

#Honda #Goldwing #Simple #Simplethings

It`s been about 10 years since I built a sound system for myself. Used an awesome enclosure from @kuztomboxes to fit under the passenger side rear seat as it house a @garmin_audio (JL Audio) W1 twelve inch subwoofer. I`m also using their XDM 5 channel amplifier mounted to the back wall (no holes made to the cab) to power the sub and C2 speakers. @pioneercaraudio sends signal to the setup.

Simple, compact and efficient. The charging system is also updated with new grounds, second battery and high output @gmparts_acdelco alternator.

@lordcoparts

#GMT900 #Caraudio #JLAudio #music #gofasthavefun

Finally had a little time to be a nerd with OCD. My PC tower needed to be replaced so I took the time to harness all the cables so it`s tidy in the cabinet and significantly easier to service. Also added a @acinfinityinc rack fan which is automated with its own thermistor to help with ventilation.

#PC #Computer #Nerd

The @bandmracing_official is an awesome differential cover. Cast aluminum with fins to dissipate heat and adds rigidity. Don`t overfill to the fill port, read the instructions.

The bearing cap bolts are a nice touch like @taperformance design. Also both have a curve internally so fluid can sling correctly and not aerate the fluid creating more hear. @bankspower proved that flat back differential covers make things worse.

You will have to get longer M8 thread factory style bolts as the provided Allen head bolts won`t allow you to mount the brake lines. Also made a bracket for the breather and parking brake cable using stainless clamps to hold in piece.

@Youtube video coming soon!

#gofasthavefun #GMT900 #GMT800 #YouTube #Canada

Bentley Bentayga and Range Rover Sport getting some interior tweaks to repair the damaged panels and lighting upgrades.

#SUV #Interior #Bentley #RangeRover #Vancouver