AnthonyJ350
HVAC Blend Motor Actuator Recalibration Procedure for GM Trucks & SUVS | AnthonyJ350
8.7K 1.5K
Some GM trucks in the early 2000's may have an issue where the temperature may get stuck blowing hot air on the driver's side and cold air on the passenger side. If you climate controls are not working properly, the culprit tends to be the HVAC blend motor/ actuator door.
Before purchasing anything or attempting to make a repair, try doing the reset procedure in this video.
Reset Procedure:
http://sparkys-answers.com/2011/08/hvac-actuator-recalibration-procedure.html
#HVAC #ResetProcedure #HeaterControls
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
HVAC Blend Motor Actuator Recalibration Procedure for GM Trucks & SUVS | AnthonyJ350
https://www.youtube.com/watch?v=grF8aRtgu1I
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Blend Motor Recalibration (0:00)
Reasons for malfunction (0:18)
Recalibration Procedure: (2:42)
Conclusion: (5:37)
Painting Interior Panels Part 1 (Nissan 350Z) | AnthonyJ350
3.8K 397
Ah the dreaded Nissan 350Z interior panels where all the paint scratches off. I don't know why Nissan decided to poorly paint these little trim bits in these interiors, but they did. And it's up to us to restore them so it doesn't look so embarrassing at the next car meet.
In this video I go over an easy and durable way I like to paint interior panels. The key is to use "high build" filler primer and truck bed liner or texture paint if you chose. I like the truck bed line because it's decided to be chemical resistant and be put through very harsh environments. So if you use it in the interior it's going to last a long time.
#SprayPaint #InteriorPanel #Painting
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Painting Interior Panels Part 1 (Nissan 350Z) | AnthonyJ753
https://www.youtube.com/watch?v=6vopxhHPTGA
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Painting with Bedliner: (0:00)
Disassembly: (0:58)
Surface Prep: (3:55)
Painting: (5:43)
Conclusion: (9:24)
How to Install a Car Stereo / Car Deck / Head Unit Installation (with Butt Connectors) | AnthonyJ350
2.7K 766
Getting better sound and functionality starts with changing your head unit. You'll see step by step what's involved in a car stereo install / wiring up and installing an after market head unit into a vehicle. You'll want to note that this is a deck install in its simplest form. Vehicle with factory amplifiers or complex dis-assembly can create a larger challenge. If you're still unsure how to do it, it might not be a bad idea to have your local professional do it for you.
#DeckInstall #HeadUnit #Stereo #Music
This is a demonstration video showing how to properly install an aftermarket head unit into a particular vehicle (2003 Mitsubishi Lancer).
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
How to Install a Car Stereo / Car Deck / Head Unit Installation (with Butt Connectors) | AnthonyJ350
https://www.youtube.com/watch?v=W8p4GBzBjU8
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Head Unit Installation: (0:00)
Wire Crimp Connections: (0:26)
Head Unit Prep: (3:50)
Installation: (4:27)
Component Speaker Installation | AnthonyJ350
2K 363
Get better sound and imaging! In this video I show you the basics to installing component speakers and things you should consider when doing the job.
There are several ways to installing component speakers and location to where the cross overs go. This video is showing the easiest way for this particular vehicle because it already has factory locations for the tweeters.
Vehicle: 2008 Chevrolet Silverado
Product: MTX Component Speakers
#Speakers #Music #SpeakerInstall #ComponentSpeakers
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Component Speaker Installation | AnthonyJ350
https://www.youtube.com/watch?v=BrgrrenXgwQ
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Overhead Screen / Monitor DVD player Installation (Alpine PKGRSE2) | AnthonyJ350
1.7K 233
http://www.alpine-canada.com/ |
Keep the kids quiet in the back! Honestly why else do people really buy these things? In this video we go over the basics to installing an overhead screen into a vehicle and things you have to consider while doing the install.
Vehicle: 2010 Expedition
Product: Alpine PKGRSE2
#OverheadScreen #Movies #Entertainment #Alpine #RearScreen #Install
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Overhead Screen / Monitor DVD player Installation (Alpine PKGRSE2) | AnthonyJ856
https://www.youtube.com/watch?v=PxBhXZHSWE0
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Viper Security and Remote Starter 5902 & SMART START (2007 Hummer H2) | AnthonyJ350
1.7K 316
Secure your vehicle with style! This is a demonstration video of the basic functions of a Viper 5902 (DEI product) and some advanced features you can add i.e. window roll up, down and SMART START feature. The featured vehicle is a 2007 Hummer H2.
#DirectedElectronics #Viper #SecuritySystem #RemoteStarter #12Volt #Install #Installer #Hummer #H2
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Viper Security and Remote Starter 5902 & SMART START (2007 Hummer H2) | AnthonyJ350
https://www.youtube.com/watch?v=iWlZwYTZpUw
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Mazda 3 Headlight bulb replacement | AnthonyJ350
644 242
In this tutorial I show you how to access and change the headlight bulb on a 2007 Mazda 3. Pay attention to the whole video cause there are simple tips throughout the video to make this job quick and painless.
Products used were PIAA's H7 halogen replacement bulbs.
#Headlights #HeadlightBulb #Halogen #Lighting
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Mazda 3 Headlight bulb replacement | AnthonyJ350
https://www.youtube.com/watch?v=s3CDPZp5f0Y
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
2WD vs 4WD Polished Snow/ Icy Incline Challenge (All Season vs Winter Tires) | AnthonyJ350
1.7K 938
In this video we go over a variety of vehicles with different tire and traction device setups and see how they do on a snowy incline.
Dodge Sprinter: All Season Tires, RWD & Traction Control
Mazda Protege: All Season Tires, FWD
Chevy Silverado: Studded Snow Tires, RWD, G80 Locker
Nissan Frontier: All Terrain Tires, 4WD, Electronic Locker and Traction Control
The intention of the video is to also consider the tires you're using, depending on the season to help maximize road safety.
2nd Gear clarification video https://www.youtube.com/watch?v=NhZpIPIe66g
*Correction 2nd gear reduces torque applied and does not slow down rotation.* But why I was saying that is because from a start, a NON Slipping wheel making traction does spin slower than a wheel just spinning quickly right off the bat. You know what I mean, so just watch the stupid video. https://www.youtube.com/watch?v=NhZpIPIe66g
Here is another video clarifying the whole 2nd gear argument https://www.youtube.com/watch?v=f31WBscnFh0
#2WD #4WD #2WDvs4WD #4X4 #Snow #Winter
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
2WD vs 4WD Polished Snow/ Icy Incline Challenge (All Season vs Winter Tires) | AnthonyJ350
https://www.youtube.com/watch?v=-RRC7aU3utw
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Car STEREO Installation step by step (Head Unit Install) | AnthonyJ350
1.8K 243
In this video I go through a complete head unit installation from start to finish showing everything involved on a basic Honda CR-V. I go over basic tools and procedures that a professional shop will take to do the job properly.
#HeadUnit #Stereo #Installation #12Volt #DeckInstall
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Car STEREO Installation step by step (Head Unit Install) | AnthonyJ773
https://www.youtube.com/watch?v=q7m5kl_WyX0
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Mono Block Amplifier Install / Sub Amp Installation | AnthonyJ350
1.1K 211
In this video I go over the basics to installing an amp and sub into your vehicle using a hi-low / line level converter to get signal off a stock sound system.
Products used:
MTX Thunder Subs, Alpine M500 Amplifier, ReQ line level converter and Stinger wiring
#Amplifier #Bass #SubWoofer
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Mono Block Amplifier Install / Sub Amp Installation | AnthonyJ350
https://www.youtube.com/watch?v=JGAXMntEwnU
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Ported vs Sealed Enclosure / Sub Box | AnthonyJ350
1.6K 648
Which one to get? In this video I go over some of the basics when it comes to comparing a ported enclosure to a sealed one. Both of their own set of unique characteristics and they should be taken into account when building a sound system, in order to achieve the type of sound you're going after.
One is not better than the other, you just need to know the application and what you're trying to achieve. Sealed enclosures are definitely better when space is at a premium and you're trying to hit a variety of frequencies easily. Sealed does require more power to run though however, because the air inside helps act as a suspension it also adds resistance. So make sure you have a good amplifier hooked up.
Ported/ vented enclosures are a more efficient design when it comes to bass output.
Music by: Erick Carlson "Undefeated Dirty South"
http://getatmeforbeats.com
#Bass #SubWoofer #CarAudio #Music #Sealed #Ported
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Ported vs Sealed Enclosure / Sub Box | AnthonyJ350
https://www.youtube.com/watch?v=u12wrI_N-8U
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
How to Solder Wire / Soldering Basics Tutorial | AnthonyJ350
2.7K 311
This is a quick crash course where it comes to soldering basics which I use and find to be very effective. Learn about the tools involved, types of solder (lead and lead free) and techniques in soldering and cleaning the equipment.
#Soldering #Weller #Wiring #12Volt #Solder
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
How to Solder Wire / Soldering Basics Tutorial | AnthonyJ350
https://www.youtube.com/watch?v=BxASFu19bLU
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Bass in TIGHT Space (Alternative sub woofer Enclosures) | AnthonyJ350
1.3K 225
http://www.jlaudio.ca/car-audio-stealthbox
Get more bass without losing the space! In this video, I try to help give you ideas to help you get more bass from your ride without taking up all your cargo space. I show custom enclosure, vehicle specific enclosures, to sub setups that just don't take up that much space at all.
So hopefully this video will people that always wanted to get some "thump" out of their ride but weren't too sure where to put a sub enclosure.
Watch till the end because I have a quick slide show of other vehicles I've worked on to help give a better idea what's out there.
#Music #Bass #SubWoofer #VehicleSpecific #Enclosure
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Bass in TIGHT Space (Alternative sub woofer Enclosures) | AnthonyJ350
https://www.youtube.com/watch?v=ett8wTpnYJI
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Air bag Suspension Helper Spring Installation (Firestone Ride Rite) | AnthonyJ350
453 30
Handle more weight, properly! In this video we are installing Ride Rite airbag helper springs from Firestone for XMT Construction to better help the pickup handle payload and heavy tongue weights when towing.
Here we go through some basic tips to installing the airbags to make your install easier and proper.
Too many times do I see trucks hauling payload or towing and they are just overloaded. Most trucks on the market have their spring rates tuned for comfort, which sacrifices load carrying capabilities. Airbags or airbag helper springs will help you keep your rig level when loaded, and also give you the option to soften the ride when you're not carrying anything.
Product Featured: Firestone Ride Rite Airbag Helper Springs
#Trucks #Suspension #Airbag #RideRite #Towing #Payload
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Air bag Suspension Helper Spring Installation (Firestone Ride Rite) | AnthonyJ350
https://www.youtube.com/watch?v=mVt36FNhIaw
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
EATON G80 LOCKER / Locking Differential (Chevrolet Silverado) | AnthonyJ350
1.4K 620
Look for RP0 code G80 in your glovebox (on the sticker) to see if your vehicle came with one from the factory.
Showing the EATON G80 locking differential working in a variety of situations (mud, snow, wet pavement) and giving a brief description about it and its use in the beginning of the video.
*I state in the video this is designed to be a LOW SPEED traction device. How ever in the video you'll see me spooling up the tires quite a bit. It isn't recommended to put this unit through that type of abuse, an LSD is better suited for that. But this came in the truck when I bought it and it works, and I just like having fun with my gear and pushing it to its limit. I am fully aware of the consequences in terms of catastrophic differential failure.
Hope you find this video helpful!
Vehicle: 2005 Chevrolet Silverado 4.8L V8
Tires: BF Goodrich Winter Slalom KSI
#EATON #G80 #Locker #2WD #4WD #TractionDevice #4X4 #Offroading
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
EATON G80 LOCKER / Locking Differential (Chevrolet Silverado) | AnthonyJ350
https://www.youtube.com/watch?v=f31WBscnFh0
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Amplifier and Sub Woofer Installation | AnthonyJ350
691 162
*Sorry this video has had technical difficulties on Youtube. Please click the link in the video to see the re-posted version of this video.*
Get better sound and more low end grunt from your sound system! This is a demonstration video of how to do an amp and sub installation in a particular vehicle with a stock deck (2003 Cadillac CTS).
I go over where to run the wires properly, how to hook them up and other little tips are covered.
Products used: MTX Thunder Subs, Alpine M500 Amplifier, ReQ line converter and Stinger wiring
#Bass #SubWoofer #Amplifier #Music
Music by: Kevin Macleod and EFREEZEE
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Amplifier and Sub Woofer Installation | AnthonyJ350
https://www.youtube.com/watch?v=quxg9B5Xz6A
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
DE-BADGE your Car or Truck / Remove molding from a vehicle | AnthonyJ350
1.9K 236
In this video we show you how to easily remove body side molding or badges from your vehicle and make sure you don't damage the paint.
Tools and materials needed:
Heat Gun
Fishing Line
Cleaner (All Purpose or WD-40)
Polishing Compounds
#Debadging #EmblemRemoval #MoldingRemoval
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
DE-BADGE your Car or Truck / Remove molding from a vehicle | AnthonyJ350
https://www.youtube.com/watch?v=m0BEK4AzDmw
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Aftermarket Car Stereo Wiring Colours Explained (Head Unit wiring) | AnthonyJ350
AnthonyJ350 2.5M views July 18, 2015 2:57 PM
7.8K 490
Don't know what all the colours on your stereo wiring harness are for? In this video I go over the very basic fundamentals for the wiring of an after market head unit. We go over what the colours mean and what the wires do in a car.
#Wiring #Stereo #HeadUnit #Install
Subscribe for more automative tips!: http://bit.ly/sub2anthonyJ350
Watch my most popular uploads!: http://bit.ly/anthonyJ350howto
Website: http://gofasthavefun.ca
Instagram: https://www.instagram.com/anthonyj350
Twitter: https://twitter.com/AnthonyJ350
Facebook: https://www.facebook.com/AJ350
Shop: https://www.amazon.com/shop/anthonyj350
Music available - http://www.jinglepunks.com & http://www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (http://www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Aftermarket Car Stereo Wiring Colours Explained (Head Unit wiring) | AnthonyJ350
https://www.youtube.com/watch?v=buXRMeUCMi0
ANTHONYJ350
https://www.youtube.com/AnthonyJ350
Stereo Wiring Colours Explained: (0:00)
Wire Description: (1:20)
Testing in the Vehicle: (3:19)
Conclusion: (6:07) ...